Four-port impeller design with special sealing technology to prevent oil leakage. The VSI6X series vertical shaft impact crusher is a new type of sand making and crushing equipment that incorporates years of R&D experience and technical concepts. It adopts a brand-new four-port impeller design and a special sealing structure to prevent oil leakage from the bearing cylinder. It has multiple national patented technologies and features energy saving, long service life, and wide application. It helps large sand plants gradually move towards large-scale and centralized production to meet the national requirements for environmental protection and production capacity.
Application Scope:Metallic and non-metallic ores, building materials, artificial sand, metallurgical slag
material:River pebbles, granite, basalt, iron ore, limestone, calcite, quartz, diabase, coal, calcium carbide, etc.
The motor drives the main shaft of the bearing cylinder transmission part to rotate at high speed. At the same time, the rotor rotates at high speed with the main shaft. The material entering the impeller is accelerated by the impeller and then sprayed into the crushing chamber. It collides and grinds with the material lining formed in the crushing chamber, converting the kinetic energy gained by the accelerated material into the energy required for crushing or shaping the material. The material circulates multiple times in the crushing chamber and is crushed and shaped multiple times under the action of the surrounding gas vortex, thereby achieving continuous crushing and shaping of the material. It is discharged from the bottom of the machine to form the desired finished material. This crushing method is called “stone-on-stone”. This mode is mainly used for shaping and crushing stone. In addition, this equipment is also equipped with a “stone-on-iron” crushing mode. Unlike stone-on-stone, after the material is sprayed out of the rotor, it collides with the impact blocks installed in the crushing chamber. The energy gained by the accelerated material is converted into the energy required for collision and crushing with the impact blocks. After the impact, the material is directly discharged from the bottom of the machine. It cannot achieve multiple cycles of crushing in the crushing chamber. This crushing method is mainly suitable for working occasions where crushing is the primary function (to provide a large crushing ratio).
Product Selling Points
Quick switching between breaking modes
Optimizing the crushing chamber structure allows for rapid switching between stone-on-stone and stone-on-iron crushing modes. The “stone-on-stone” mode incorporates material layer baffles, forming a dense and stable stone layer that yields more cubic finished products even when dealing with medium to high hardness stones. The “stone-on-iron” mode optimizes the installation angle of the impact blocks, reducing energy loss and achieving a higher crushing ratio.
Performance improvement of key components
Key components such as the impeller, bearing housing, and lower part of the machine body have been redesigned: the impeller adopts a four-port design to increase the material throughput and the probability of material collision; the bearing housing adopts a unique exhaust and dust prevention device and sealing structure to prevent dust from entering and causing oil leakage from the lower bearing cover; the lower part of the machine body has been changed from a “well” structure to a “cross” structure to prevent material from clogging the discharge channel.
Intelligent control of thin oil lubrication
It adopts thin oil lubrication and is equipped with an air-cooling system. Controlled by PLC and intelligent instruments, it can realize fully automatic lubrication control and adjustable lubrication temperature, providing more ideal working conditions for bearings.
User-friendly and easy to maintain
The standard configuration includes a self-lifting boom, which is coaxial with the lifting arm for easy maintenance of the impeller and bearing housing; the feed hopper is lifted by a hydraulic jack for easy maintenance; and the guardrail height is reduced to avoid interference when the feed hopper is opened.
Product Parameters
model
Sand making
Plastic Surgery
Sand making
Plastic Surgery
spindle speed(r/min)
motor
Maximum feed particle size(mm)
Through quantity(t/h)
Voltage (optional)
power(kw)
VSI6X8015
≤30
≤40
109-117
131-210
1300-1700
380V
75×2
VSI6X9026
≤35
≤45
167-179
200-323
1200-1500
380V
132×2
VSI6X9026Z
≤35
≤45
167-179
200-323
1200-1500
380V
132×2
VSI6X1040
≤40
≤50
264-283
317-515
1100-1400
380V
200×2
VSI6X1040Z
≤40
≤50
264-283
317-515
1100-1400
380V
200×3
VSI6X1150
≤45
≤55
344-368
413-663
1000-1300
380V
250×2
VSI6X1150Z
≤45
≤55
344-368
413-663
1000-1300
380V
250×2
VSI6X1150G
≤45
≤55
344-368
413-663
1000-1300
6KV/10KV
250×2
VSI6X1263
≤50
≤60
454-486
545-872
900-1200
380V
315×2
VSI6X1263Z
≤50
≤60
454-486
545-872
900-1200
380V
315×2
VSI6X1263G
≤50
≤60
454-486
545-872
900-1200
6KV/10KV
315×2
VSI6X1380
≤50
≤60
601-643
721-1150
800-1100
380V
400×2
VSI6X1380G
≤50
≤60
601-643
721-1150
800-1100
6KV/10KV
400×2
VSI6X13100
≤50
≤60
738-839
940-1510
800-1100
380V
500×2
VSI6X13100G
≤50
≤60
738-839
940-1510
800-1100
6KV/10KV
500×2
*Technical data is for reference only.
Why Choose Us?
1.Full Range of Equipment. Your One-Stop Source
We simplify your gravel & sand operations with full-process equipment from a single source, saving you time and effort.
2.Professional Service Guarantees Peace of Mind
Expert Maintenance Team + Genuine New Parts + Comprehensive Warranty for Stable, Continuous Production.
3.Transparent Inspection. Trusted Partnership
Check the interior conditions on-site. Buy with confidence.
4.Rich Experience
30+ years in the industry. Precise market insight,professional service.
QHow long does it take from order to delivery?
AFor equipment in stock, we can complete the internal inspection and loading within 7–10 working days. The sea freight duration depends on your destination port (e.g., 20-30 days to Southeast Asia or Africa). We will provide a clear timeline once the shipping route is confirmed.
QHow do I know the equipment is in good working condition?
APrior to shipment, we provide complete testing videos and live video inspections via WhatsApp or Zoom. This allows you to see the machine running in real-time. We also provide a set of high-resolution photos showing the critical components (motor, chassis, and wear parts) to ensure transparency.
QAre spare parts readily available for the equipment I purchase?
AWe understand that downtime is costly in mining operations. We offer a comprehensive spare parts support program for every machine we sell.
QWhat factors affect the price of a crusher?
AThe main criteria for judgment are based on a comprehensive assessment of factors such as the model, size, performance, and working efficiency of the crusher.
QSince you specialize in used machinery, can I customize or order a brand-new machine through you?
AYes, absolutely. While we are a leader in the secondary market, we maintain strong strategic partnerships with top-tier global manufacturers. We can facilitate the customization and procurement of brand-new mining equipment tailored to your specific project requirements. Whether you need specialized configurations or the latest models, our team can handle the entire sourcing and technical specification process for you.
